1.Refer to the exhibit. EIGRP has been configured on all routers in the network. What additional
configuration statement should be included on router R4 to advertise a default route to its
neighbors?
A. R4(config)# ip route 0.0.0.0 0.0.0.0 10.1.1.1
B. R4(config)# ip default-network 10.0.0.0
C. R4(config-router)# default-information originate
D. R4(config)# ip route 10.0.0.0 255.0.0.0 10.1.1.1
Answer: B
2.Refer to the exhibit. Router RTA is the hub router for routers RTB and RTC. The Frame Relay
network is configured with EIGRP, and the entire network is in autonomous system 1. However,
router RTB and RTC are not receiving each other's routes. What is the solution?
A. Check and change the access lists on router RTA.
B. Configure the auto summary command under router eigrp 1 on router RTA.
C. Configure subinterfaces on the spoke routers and assign different IP address subnets for each
subinterface.
D. Issue the no ip split horizon command on router RTA.
E. Issue the no ip split horizon eigrp 1 command on router RTA.
F. Configure a distribute list on router RTA that allows it to advertise all routes to the spoke
routers.
Answer: E
3.Refer to the exhibit. EIGRP is configured on all routers in the network. On a basis of the show ip
eigrp topology output provided, what conclusion can be derived?
A. Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out
inquiring for a second successor to network 10.6.1.0/24.
B. Router R1 can send traffic destined for network 10.6.1.0/24 out of interface FastEthernet0/0.
C. Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out before
it declares the neighbor unreachable.
D. Router R1 is waiting for a reply from the neighbor 10.1.2.1 in response to the query sent out
about network 10.6.1.0/24.
Answer: D
4.Refer to the exhibit. Which three statements are true? (Choose three.)
S 62.99.153.0/24 [1/0] via 209.177.64.130
172.209.12.0/32 is subnetted, 1 subnets
D EX 172.209.1
[170/2590720] via 209.179.2.114, 06:47:28, Serial0/0/0.1239
62.113.17.0/24 is variably subnetted, 2 subnets, 2 masks
D EX 99.3.215.0/24
[170/27316] via 209.180.96.45, 09:52:10, FastEthernet11/0/0
[170/27316] via 209.180.96.44, 09:52:10, FastEthernet11/0/0
25.248.17.0/24
[90/1512111] via 209.179.66.25, 10:33:13, Serial0/0/0.1400001
[90/1512111] via 209.179.66.41, 10:33:13, Serial0/0/0.1402001
62.113.1.0/24 is variably subnetted, 12 subnets, 2 masks
D 62.113.1.227/32
[90/2611727] via 209.180.96.45, 10:33:13, FastEthernet1/0/0
[90/2611727] via 209.180.96.44, 10:33:13, FastEthernet1/0/0
S* 0.0.0.0/0 [1/0] via 209.180.96.14
A. On the routing table of R4, the 10.1.1.0/24 route appears as an O E2 route.
B. On R4, the 172.16.1.0/24 route has a metric of 20.
C. The R3 S0/0 interface should not need the no ip split-horizon eigrp 1 configuration command
for the 172.16.1.0/24 route to appear in the routing table of R2 as an D EX route.
D. The administrative distance of the 172.16.1.0/24 route in the routing table of R3 is 170.
E. On R5, the 4.0.0.0/8 route will have an administrative distance of 120 and a hop count of 6.
Answer: A,B,D
5.Which command will display EIGRP packets sent and received, as well as statistics on hello
packets, updates, queries, replies, and acknowledgments?
A. debug eigrp packets
B. show ip eigrp traffic
C. debug ip eigrp
D. show ip eigrp interfaces
Answer: B
6.Which three statements are true about EIGRP operation? (Choose three.) Select 3 response(s).
A. When summarization is configured, the router will also create a route to null 0.
B. The summary route remains in the route table, even if there are no more specific routes to the
network.
C. Summarization is configured on a per-interface level.
D. The maximum metric for the specific routes is used as the metric for the summary route.
E. Automatic summarization across major network boundaries is enabled by default.
Answer: A,C,E
7.Which two statements about the EIGRP DUAL process are correct? (Choose two.) Select 2
response(s).
A. An EIGRP route will go active if there are no successors or feasible successors in the EIGRP
topology table.
B. An EIGRP route will go passive if there are no successors in the EIGRP topology table.
C. DUAL will trigger an EIGRP query process while placing the flapping routes in the holddown
state.
D. A feasible successor in the EIGRP topology table can become the successor only after all the
query requests have been replied to.
E. The stuck in active state is caused when the wait for the query replies have timed out.
F. EIGRP queries are sent during the loading state in the EIGRP neighbor establishment process.
Answer: A,E
8.What are three key concepts that apply when configuring the EIGRP stub routing feature in a hub
and spoke network? (Choose three.) Select 3 response(s).
A. A hub router prevents routes from being advertised to the remote router.
B. Only remote routers are configured as stubs.
C. Stub routers are not queried for routes.
D. Spoke routers connected to hub routers answer the route queries for the stub router.
E. A stub router should have only EIGRP hub routers as neighbors.
F. EIGRP stub routing should be used on hub routers only.
Answer: B,C,E
9.Based on the exhibited output, which three statements are true? (Choose three.)
A. All the routes are in the passive mode because R1 is in the query process for those routes.
B. R1 is in AS 200.
C. R1 will load balance between three paths to reach the 192.168.1.48/28 prefix because all three
paths have the same advertised distance (AD) of 40512000.
D. 40512000 is the advertised distance (AD) via 192.168.1.66 to reach the 192.168.1.48/28 prefix.
E. All the routes are in the passive mode because these routes are in the hold-down state.
F. The best path for R1 to reach the 192.168.1.48/28 prefix is via 192.168.1.66.
Answer: B,D,F
10.Refer to the exhibit. EIGRP is configured with the default configuration on all routers. Auto
summarization is enabled on routers R2 and R3, but it is disabled on router R1. Which two EIGRP
routes will be seen in the routing table of router R3? (Choose two.)
A. 10.0.0.0/8
B. 172.16.10.0/24
C. 172.16.0.0/24
D. 10.10.10.0/24
E. 172.16.0.0/16
F. 10.10.0.0/16
Answer: D,E
11.Refer to the exhibit. EIGRP has been configured on routers R1 and R2. However, R1 does not
show R2 as a neighbor and does not accept routing updates from R2. What could be the cause of
the problem?
A. The no auto-summary command has not been issued under the EIGRP process on both
routers.
B. Interface E0 on router R1 has not been configured with a secondary IP address of 10.1.2.1/24.
C. EIGRP cannot exchange routing updates with a neighbor's router interface that is configured
with two IP addresses.
D. EIGRP cannot form neighbor relationship and exchange routing updates with a secondary
address.
Answer: D
12.Which EIGRP packet statement is true?
A. Update packets route reliable change information only to the affected routers.
B. Reply packets are multicast to IP address 224.0.0.10 using RTP.
C. On high-speed links, hello packets are broadcast every 5 seconds for neighbor discovery.
D. Reply packets are used to send routing updates.
E. On low-speed links, hello packets are broadcast every 15 seconds for neighbor discovery.
Answer: A
13.EIGRP has been configured to operate over Frame Relay multipoint connections. What should the
bandwidth command be set to?
A. the CIR rate of the lowest speed connection multiplied by the number of circuits
B. the CIR rate of the lowest speed connection
C. the CIR rate of the highest speed connection
D. the sum of all the CIRs divided by the number of connections
Answer: A
14.Refer to the exhibit. Router R1 is connected to networks 172.16.1.0 /26 and 172.16.1.64 /27. On
the basis of the partial output in the exhibit, which statement is true?
A. Router R1 will deny the 172.16.1.0/26 route while permitting the 172.16.1.64/27 route to be
advertised.
B. Router R1 will advertise both routes.
C. Router R1 should be reconfigured with an ACL instead of an ip prefix-list command.
D. Router R1 will deny the 172.16.1.0/27 route while permitting the 172.16.1.0/26 route to be
advertised.
Answer: D
15.Based on the exhibited output, which three statements are true? (Choose three.)
A. The route to 10.2.0.0/16 was redistributed into EIGRP.
B. A default route has been redistributed into the EIGRP autonomous system.
C. R1 is configured with the ip summary-address command.
D. R1 is sourcing an external EIGRP route from Null0.
E. The router at 10.1.1.2 is configured with the ip default-network 0.0.0.0 command.
F. R1 is configured with the variance command.
Answer: B,C,F
16.After DUAL calculations, a router has identified a successor route, but no routes have qualified as
a feasible successor. In the event that the current successor goes down, what process will EIGRP
use in the selection of a new successor?
A. EIGRP will automatically use the route with the lowest advertised distance (AD).
B. The route will transition to the active state.
C. The route will transition to the passive state.
D. EIGRP will find the interface with the lowest MAC address.
E. EIGRP will automatically use the route with the lowest feasible distance (FD).
Answer: B
17.Which three statements about the EIGRP routing protocol are true? (Choose three.)
A. EIGRP supports five generic packet types, including hello, database description (DBD), linkstate
request (LSR), link-state update (LSU), and LSAck.
B. EIGRP sends periodic hello packets to the multicast IP address 224.0.0.10.
C. EIGRP will not form a neighbor relationship with another peer when their K values are
mismatched.
D. EIGRP sends periodic hello packets to the multicast IP address 224.0.0.9.
E. EIGRP will form a neighbor relationship with another peer even when their K values are
mismatched.
F. EIGRP supports five generic packet types, including hello, update, query, reply, and ACK
packets.
Answer: B,C,F
18.EIGRP has been configured to operate over Frame Relay multipoint connections. What should the
bandwidth command be set to?
A. the CIR rate of the lowest speed connection multiplied by the number of circuits
B. the CIR rate of the lowest speed connection
C. the CIR rate of the highest speed connection
D. the sum of all the CIRs divided by the number of connections
Answer: A
19.Refer to the exhibit. EIGRP is configured on all routers in the network. On a basis of the show ip
eigrp topology output provided, what conclusion can be derived?
A. Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out
inquiring for a second successor to network 10.6.1.0/24.
B. Router R1 can send traffic destined for network 10.6.1.0/24 out of interface FastEthernet0/0.
C. Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out before
it declares the neighbor unreachable.
D. Router R1 is waiting for a reply from the neighbor 10.1.2.1 in response to the query sent out
about network 10.6.1.0/24.
Answer: D
20.Which three statements are true about EIGRP route summarization? (Choose three.)
A. When manual summarization is configured, the router immediately creates a route that points to
null0 interface.
B. Manual route summarization is configured in router configuration mode when the router is
configured for EIGRP routing.
C. Manual route summarization is configured on the interface.
D. The ip summary-address eigrp command generates a default route with an administrative
distance of 5.
E. When manual summarization is configured, the summary route will use the metric of the largest
specific metric of the summary routes.
F. The ip summary-address eigrp command generates a default route with an administrative
distance of 90.
Answer: A,C,D
21.Refer to the exhibit. Routers R1 and R2 are running EIGRP and have converged. On the basis of
the information that is presented, which statement is true?
A. Both outgoing and incoming routing updates on R1 will be permitted because the distribute-list
20 out Serial0/0 command cannot be used with association with the outgoing interface.
B. All incoming routing updates from R2 will be suppressed, but the outgoing updates will continue
to be sent.
C. Both outgoing and incoming routing updates on R1 will be stopped because of the passiveinterface
Serial0/0 configuration statement.
D. All outgoing routing updates from router R1 to router R2 will be suppressed, but the inbound
updates will continue to be received.
Answer: C
22.Refer to the exhibit. Which two statements are true? (Choose two.)
A. Router R1 will advertise connected and summary routes only.
B. The eigrp stub command will automatically enable summarization of routes on R2.
C. Router R1 is configured as a receive-only neighbor and will not send any connected, static, or
summary routes.
D. The eigrp stub command prevents all routes except a default route from being advertised to R1.
E. The eigrp stub command prevents queries from being sent from R2 to R1.
F. Router R1 will advertise connected and static routes. The sending of summary routes will not be
permitted.
Answer: A,E
23.A router has been configured with the commands router eigrp 9 and network
172.16.1.0 0.0.0.255. No other EIGRP-related commands have been configured. The
answers list the IP addresses that could be assigned to this router's Fa0/0 interface.
Which answers list an IP address/prefix length that would cause the router to enable
EIGRP on Fa0/0?
A. 172.16.0.1/23
B. 172.16.1.1/26
C. 172.16.1.1/24
D. 172.16.0.255/23
E. None of the other answers is correct.
Answer: B,C
24.Router R1 has working interfaces S0/0, S0/1, and S0/2, with IP address/prefix combinations of
10.10.10.1/24, 10.10.11.2/24, and 10.10.12.3/22. R1's configuration includes the commands
router eigrp 9 and network 10.0.0.0. The show ip eigrp interfaces command lists S0/0 and S0/1 in
the command output, but not S0/2. Which answer gives the reason for the omission? (Choose two
answers.)
A. R1 has EIGRP neighbors reachable via S0/0 and S0/1, but not via S0/2, so it is not included.
B. S0/2 may currently be in a state other than up/up.
C. The network 10.0.0.0 command requires the use of mask 255.0.0.0 due to EIGRP being
classful by default.
D. S0/2 may be configured as a passive interface.
Answer: B
25.Routers R1 and R2 are EIGRP neighbors using their Fa0/0 interfaces, respectively. An
engineer adds the ip hello-interval eigrp 9 6 command to R1's Fa0/0 configuration.
Which of the following is true regarding the results from this change?
A. The show ip eigrp neighbors command on R1 lists the revised Hello timer.
B. The show ip eigrp interfaces command on R1 lists the revised Hello timer.
C. The R1-R2 neighborship fails due to Hello timer mismatcH.
D. The show ip eigrp interfaces detail command on R1 lists the revised Hello timer.
Answer: D
26.Routers R1 and R2, currently EIGRP neighbors over their Fa0/0 interfaces (respectively)
,both use EIGRP authentication. Tuesday at 8 p.m. the neighborship fails.
Which of the following would not be useful when investigating whether authentication
had anything to do with the failure?
A. debug eigrp packet
B. show key chain
C. show ip eigrp neighbor failure
D. show clock
Answer: C
27.Router R1 has been configured with the commands router eigrp 9 and network
172.16.2.0 0.0.0.255, with no other current EIGRP configuration. R1's (working)
Fa0/0 interface has been configured with IP address 172.16.2.2/26. R1 has found
three EIGRP neighbors reachable via interface Fa0/0, including the router with IP address
172.16.2.20. When the engineer attempts to add the neighbor 172.16.2.20
fa0/0 command in EIGRP configuration mode, which of the following occurs?
A. Fa0/0 fails.
B. The command is rejecteD.
C. The existing three neighbors fail.
D. The neighborship with 172.16.2.20 fails and then reestablishes.
E. None of the other answers is correct.
Answer: C
28.Which of the following settings could prevent two potential EIGRP neighbors from becoming
neighbors? (Choose two answers.)
A. The interface used by one router to connect to the other router is passive in the EIGRP
process.
B. Duplicate EIGRP router IDs.
C. Mismatched Hold Timers.
D. IP addresses of 10.1.1.1/24 and 10.2.2.2/24, respectively.
Answer: A,D
29.An engineer has added the following configuration snippet to an implementation planning
document. The configuration will be added to Router R1, whose Fa0/0 interface connects to a LAN
to which Routers R2 and R3 also connect. R2 and R3 are already EIGRP neighbors with each
other. Assuming the snippet shows all commands on R1 related to EIGRP authentication, which
answer lists an appropriate comment to be made during the implementation plan peer review?
key chain fred
key 3
key-string whehew
interface fa0/0
ip authentication key-chain eigrp 9 fred
A. The configuration is missing one authentication-related configuration command.
B. The configuration is missing two authentication-related configuration commands.
C. Authentication type 9 is not supported; type 5 should be used insteaD.
D. The key numbers must begin with key 1, so change the key 3 command to key 1.
Answer: A
30.Which of the following are methods EIGRP uses to initially populate (seed) its EIGRP topology
table, before learning topology data from neighbors? (Choose two.)
A. By adding all subnets listed by the show ip route connected command
B. By adding the subnets of working interfaces over which static neighbors have been defined
C. By adding subnets redistributed on the local router from another routing source
D. By adding all subnets listed by the show ip route static command
Answer: B,C
We will help you prepare well for your coming CCNP 642-902 Certification Exam with confidence.CCNP 642-902 Certification Exam Training, Practice Questions and Answers with Explanations, and CCNP 642-902 braindumps are available to you on my blog.
Free download CCNP 642-902(Implementing cisco ip routing) training material and Practice Test,if you need more IT exam real Q&As,u can leave ur mailbox,or like my facebook page.
No comments:
Post a Comment